.png)
Slashers
There are many maintenance requirements around the farm or lifestyle block. Whether it is slashing paddocks, cleaning up around sheds, making fire breaks, weed control or estate lawns we have a product to suit most of your needs.
Daken 405 Series Slasher
Light to medium duty slashers. Built with no under body bracing and with good rotor to body clearance they do a great cutting job. The 405 series slashers are suitable for many cutting applications for tractors up to 50hp.They are not built to a price but fully featured to give you the best possible performance.
1M - 1.5M available.
Daken 759 Series Slasher
These slashers are built along the same design line as the 405 except that they are bigger and heavier. Featuring 6mm top plate and an 8” clutch they can handle some work whether it’s cleaning fire breaks around crops and sheds or tacking weeds and unwonted regrowth.
They are also not built to a price but fully featured to give you the best possible performance.
Post Hole Diggers
We have a variety of Post Hole diggers to suit a range of tractors in different applications. General fencing in hard and soft ground or to assist with tree planting. Farmer, contractor or hobbyist we have a product to suit you.
Daken Hydraulic Down Pressure Post Hole Digger | 50-75 HP
Designed to provide extra down pressure to penetrate hard ground. This fixed frame design does not use the tractor linkage to raise or lower, instead it uses a powerful hydraulic ram to pivot the auger frame helping the auger penetrate the ground.
Daken Post Hole Digger | 50-75HP
Our Post Hole Diggers are built with years of experience in design, to deliver a strong functional product. Both series of Post Hole digger (50hp and 75hp gearbox) has an A frame and jibs that are built from RHS steel, with a hot dip galvanised finish. The digger is designed with plenty of adjustment to suit most tractors to ensure you can dig a hole up 40" in depth.
.jpg)
"Little Ripper" Post Hole digger
The Daken Post Hole Digger is designed with plenty of adjustment to suit most tractors to ensure you can dig a hole up 40" in depth. Ideal for smaller tractors and great for hobby farming.
Grader Blades
A rear three point linkage grader blade is capable of completing many tasks, grading roads, clearing or making drains, draining or filling low flooded areas and spreading fill.
Daken D180 Grader Blades
The Daken D180 Grader Blades have a design that has served many years of service. Suitable for tractors up to 60hp, it features a deep reinforced mould board fitted to a reversible cutting edge that can pivot through 360 deg.
​
Available in a ripper model with 7 rippers.
Daken Grader Blade 4-6'
The 6' Grader Blade is a simple constructed, lighter weight grader ideally suited for tractors up to 35hp. A handy tool for light grading work or general clean up. Can be offset to gain extra width so you can grade up to a fence line.
-
Blade length available in two size: 1.8m (6’) or 1.2m (4')
-
Reversible bolt on cutting edge
-
Left or Right offset
-
Blade can rotate left or right
-
Fits Cat 0 and 1
Carryalls
The Carryall is a handy versatile tool for your Farm tractor. Carry feed, fencing or spray gear. Built to last with its all steel construction.
Daken Carryall - 4'-6' Carry-all Steel Floor
The Carryall is a handy versatile tool for your Farm tractor. Carry feed, fencing or spray gear. Built to last with its all steel construction.
​
-
Available in 4’,5’and 6’
-
All steel construction
-
4mm steel checker plate floor
-
Suits cat 0 and 1 tractors
-
Load limit 250kg
​
​
​
​
Hay Handling
Not all tractors have a FEL fitted but owners have a need to move and feed out hay efficiently. We have several products available to handle round and large square bales.
Daken Soft Hands
The Daken Soft Hands are designed to fit Euro hitch tractor front end loaders. Our Soft hands feature a single hydraulic ram which allows the hands to evenly wrap around the bale. Suitable for soft, hard and silage bales.
​
-
Single Hydraulic Grab
-
Suitable for soft and silage bales
-
Heavy construction
-
800mm - 1500mm grab
-
Rated to 1200kg
-
Item weight 160kg
Daken Bale Fork
The Daken bale fork is designed to fit Euro hitch tractor front end loaders. It is made to carry up to 5 spears, each removable. Great for moving round and large square bales or moving silage.
​
-
Frame takes up to 5 tynes
-
Heavy duty conus 2 tynes
-
Fits standard Euro hitch FEL
-
Tynes 1240mm
Daken Three-Point Linkage Bale Spike
The three-point linkage round bale spike is designed to handle a single round hay bale.
​
-
Bolt-in main spike
-
2 stabiliser spikes
-
Suits Cat 0 and 1
-
Made from RHS
-
Weight: 45KG
Daken Combo Round Bale Fork
A development of Daken's original "Udi Round bale fork". This model will still carry and feed out round bales, but now has three "conus 2" receivers mounted and it's supplied with three spikes. With this additon it will carry large square bales and will also pick up pallets.
Feeding out is simple, carry the bale to site, position the tynes to the side and insert the spikes. With the bale on the ground simply drive the tractor forward and unrolled the bale. Ideally the bale will be positioned to roll out the reverse of how it was baled.
​
-
Pick up and feed out round bales
-
Pick up large square bales
-
Will pick up pallets
-
Come with 3 hay spikes
-
Comes with three 1.2m Hay Spikes
-
Weight: 121KG
Daken Three-Point Linkage Double Bale Spike
The Daken 3PL Double Bale spike is suitable for picking up and moving round and large square bales. Features twin 1m spring steel conus 2 spikes.
-
The twin spikes are supported by 100 x 100 box section steel with 100 x 50 used in the upper frame
-
Suitable for most cat 1 and Cat 2 tractors
-
Weight: 80KG
-
1m spring steel conus 2 spikes
Mulchers
Daken Flail mowers are designed and built to handle a variety of material and applications. They can be used on lawn, pasture, vineyards and orchards.
Daken Mulcher
Daken Flail mowers are designed and built for light mulching. Suitable for light application on lawns and improved ground, standard with hammer type blades and rear roller.
Not recommended for clearing unimproved ground or medium to heavy growth.
.jpg)
Muratori MTL5 - 135 Side Mulcher
Muratori Heavy Duty Side Arm Mulcher, ideal for maintenance of ditches, canal sideboards and road sides.
​
Standard equipment:
-
Standard driveline
-
Front safety protections
-
Rear roller
-
Hydraulic inclination adjustment
-
Hydraulic side adjustment
-
Gearbox at PTO 540 RPM and free wheel inside
-
Oscillating bearings with double row-ball mounted on rotor
-
2 Year Warranty
Muratori Mulcher - MT61
Suites tractors up to 60hp. Comes with Hammer Blades, rear roller and front flappers. Ideal for pasture mulching and general maintenance.
​
Standard equipment:
-
3-Point linkage
-
cat. 2 with side-movement at 2 positions
-
Drive line
-
Gearbox with Free Wheel Inside
-
counterknife
-
Driveline
-
Read Roller
-
Rotor with different kind of tools
-
Front protection flaps
-
Side bumpers
-
Hammer Blades
-
Skids
-
2 Year Warranty
Muratori Mulcher - MT11 - 105
Comes with Hammer blades, rear roller and front flap, max 25hp cat 1, ideal for lighter work with lower hp tractors where a higher quality machine is desired.
​
Standard Equipment:
-
3-Point linkage
-
cat.1
-
Rear roller adjustable in height.
-
Overrun clutch in the gearbox.
-
Applicable on PTO at 540 or 1000 rpm.
-
Standard drive line
-
2 Year Warranty
Muratori MTL2 - 130 Side Mulcher
MTL2 Muratori Side Mulcher for tractors up to 40hp, this flail mower can work in extreme offset position and in various angles, it is ideal for the use in green areas like parks and gardens. Strong and versatile but not excessively heavy so to suit small tractors.
​
Standard equipment:
-
Standard driveline
-
Safety and self-levelling breakaway coupling
-
Front safety protections
-
Rear roller
-
Hydraulic side and inclination adjustment
-
Gearbox at PTO 540 RPM and free wheel inside
-
Skids Welded on main frame
-
2 Year Warranty
Muratori Mulcher - MT24
Muratori Mulcher for tractors up to 120HP. Extremely sturdy and compact unit. Heavy-gauge balanced rotor, mounted on self-aligning bearings. Specially-shaped all-purpose hammers for breaking up wood, grapevine shoots and grass.
​
Standard equipment:
-
3-Point linkage
-
cat. 2 with side-movement at 2 positions
-
Drive line with free wheel inside gearbox
-
Rear roller adjustable
-
Adjustable rear cover
-
Rotor with knives or hammers
-
2 Year Warranty
Muratori Mulcher - MT31 - 105
Muratori Mulcher suitable for tractors up to 35HP, fitted with hammers.
For grass and vine pruning's. "Y" blades also available.
​
Standard equipment:
-
Tubular 3/point linkage
-
cat.1
-
Drive line
-
Free wheel inside gearbox
-
Rear roller
-
Universal knives
-
Reinforced frame with double metal sheet
-
2 Year Warranty
Muratori Mulcher - MT40 - 140
Muratori Mulcher for tractors up to 50HP. Ideal for narrow places, and perfect for vineyards, orchards, parks and green surfaces.
​
Standard equipment:
-
Square tube
-
3-point linkage
-
Cat.1
-
Driveline
-
Gearbox including overun clutch
-
Additional reinforcing front frame
-
Counter-knives
-
Rear roller
-
Front protection flaps
-
Rear rubber protection flaps
-
2 Year Warranty
Rondini Fertiliser Spreaders
The Rondini range of fertiliser spreaders are extremely simple to use, giving farmers an economical tractor mounted spreader suitable for all types of spreading applications. Many models are available from a small tow behind for the ride-on mower, to one tonne machines capable of delivering larger quantities in a single pass. Several options are also available such as powder agitator and single or twin side chute.
SPT160
RONDINI SPT160 is a trailed ground-driven Spreader. It has been designed primarily for large gardens or small areas. The hopper has maximum carrying capacity of 180kg of fertilizer.
​
Features:
· Adjustable spreading limiter for windy conditions.
· Wide flotation tyres.
· 3 spreading patterns at the touch of a lever.
· Adjustable drawbar to suit all small tractors, ride-on mowers and 4 wheel Quad bikes.
· Spreading width 1-6mt
SPT500
Rondini SP500 offers a simple, effective and economical solution to spreading pilled, granular or powdered fertilizers. The hopper has a maximum carrying capacity of approximately 480kg of fertilizer
Features:
-
Single Spinner
-
Adjustable spreading pattern.
-
High quality Components and design
-
Powder coated frame and hopper
-
350L Capacity
-
Carries 480kg or nine 50kg bags
-
Spreading width 6-14mt
-
Comes with Standard agitator and PTO shaft
-
Cat "1"
-
Made in Italy
SPT500 GALVANISED
Rondini SP500 offers a simple, effective and economical solution to spreading pilled, granular or powdered fertilizers. The hopper has a maximum carrying capacity of approximately 480kg of fertilizer.
​
Features:
-
Single Spinner
-
Adjustable spreading pattern.
-
High quality Components and design
-
350L Capacity
-
Carries 480kg or nine 50kg Bags
-
Spreading width 6-14mt
-
Comes with Standard agitator and PTO shaft
-
Stainless Steel Shutter and Vanes
-
Cat "1"
-
Made in Italy
SP500 Poly Spreader
This new model features a non corrosive Poly Hopper. Mounted on a hot dip galvanised frame with Stainless Steel Shutter and Vanes. The bottom of the hopper is also sandwiched between 2 Stainless Steel plates, making it a very long lasting spreader.
​
Features:
-
Single Spinner
-
Adjustable spreading pattern
-
350L Capacity
-
Carries 480kg or nine 50kg bags
-
Spreading width 6-14mt
-
Poly Hopper approx 6.5mm thick
-
Hot dip Galvanised Frame
-
Stainless Steel Shutter and Vanes
-
Comes with Standard agitator and PTO shaft
-
Cat "1"
-
Made in Italy
SR500, SR750, SR950
The Rondini Twin Spinner Spreaders are ideal for spreading large quantities of fertilizer over a wide area, with the minimum number of passes. With a variable throw of 8 to 18 m, and capacities up to 1 tonne, these big Twin Spreaders represent excellent value for money.
​
Features:
· Heavy duty steel frame with removable hopper
· Heavy duty gearbox x2
· Twin cable operating remote control, for use in cab tractors.
· Optional accessories include Twin Side Throw attachment for orchard use.
· Spreading width 8-18mt
SQFT600, SQFT800, SQFT1000
The Rondini Pendulum Spreaders are manufactured from corrosive resistant materials such as:
- tubular steel painted with polyester resin
- reinforced fibreglass hoppers
- stainless steel
​
Features:
· Heavy duty steel frame with removable hopper
· Heavy duty gearbox x2
· Twin cable operating remote control, for use in cab tractors.
· Optional accessories include Twin Side Throw attachment for orchard use.
· Spreading width 8-18mt